Panel Drapery Swing arm hydraulic press

It applies to the shaping and the cutting of one layer or several layers of the materials such as, leather, rubber, canvas, nylon, cardborad, and so on.Especially for drapery lining fabric,Wave Drapery,panel drapery and so on.

 Panel Drapery Swing arm hydraulic press

Panel Drapery Swing arm hydraulic press

1.High quality seamless steel tubes are adopted and clicker press into pillars, which are supported by top and bottom holes, to guarantee the flexible rotation and good reliability of upper beating board.
2.The switch is operated by both hands to guarantee the safety of operators.
3.The whole die cutting  machine use self-lubricating system to reduce wear and extend the service life of the machine.
4.The inertial of flying wheel is used to store energy, which saves the energy.
5.The use of time control allows for simple and convenient setting of cutter depth.
Model GSB-8,GSB-10 GSB-2C/10/12/14/16/18
Maximum cutting power(KN/TONS) 78.5KN(8TONS), 98KN(10TONS) 10ton to 18 tons
Cutting Table 650×350mm 800×400mm,900×430,450mm
Swaying arm width(mm) 350mm 350mm
Max.Stroke(mm) 75mm 75mm
Motor Power(KW/HP) 0.75KW/1HP 0.75KW/1.5HP
Machine Dumensions(mm) 600×800×1500mm 900×900×1400mm
Packing Size(mm) 1050×1050×1500mm 1350×1200×1550mm
Net Weight(No oil)(Kg) 580kg 750-910kg
Gross Weight(Kg) 650kg 800-950kg

 

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google+ photo

You are commenting using your Google+ account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

w

Connecting to %s

%d bloggers like this: